1st Shift Foundry Team Member
Baker Manufacturing Company Baker Manufacturing Company Evansville, WI Evansville, WI Full-time Full-time From $18.
75 an hour From $18.
75 an hour Department:
Deck/Molding/Grinding Reports To:
Deck/Molding/Grinding Supervisor $2,500 Sign on/ Retention Bonus SUMMARY Forms sand molds to fabricate metal castings by performing the following duties.
Duties may be performed either individually or in a crew of two individuals and using either automatic, single station or two station cope and drag type of equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Must be willing and flexible to work in a variety of foundry positions:
Pour/Shift, Mold, Core, Grind, and Clean.
Molder - Forms sand molds to fabricate metal castings.
Duties may be performed either individually or in a crew of two individuals and using either automatic, single station or two station cope and drag type of equipment.
not plastic injection Coremaker - Makes sand cores used in molds to form holes or hollows in metal castings Grinder - Grinds and chips work piece to groove, bevel, round or straighten edges or remove excess stock from metals as specified by drawings, job orders, or guidelines or to removed defects, such as shrink cracks and holes Pour/Shifter - Operate transfer ladles containing molten metal to pour into prepared sand molds of various sizes and configurations.
Place metal weights and jackets on prepared sand molds preparatory to pouring molten metal into the molds.
Practices safe work habits, maintains workplace in good order, and wears all issued personal protective equipment at all times in the workplace.
Other duties may be assigned.
SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
EDUCATION AND/OR EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
MATHEMATICAL SKILLS Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's.
Ability to perform these operations using units of American money and weight measurement, volume, and distance.
REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel.
The employee frequently is required to walk, reach with hands and arms, and talk, or hear.
The employee must regularly lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
Individual should have ability to wear a respirator.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes, and vibration.
The employee is frequently exposed to extreme heat.
The noise level in the work environment is usually very loud.
COMPETENCE, AWARENESS AND TRAINING Competence, awareness, and training for probationary employees will be assessed by the New Employee Checklist, and the evaluations conducted and 30, 60, and 90 days, along with other training as needed.
Competence, awareness, and training for regular employees will be assessed when annual evaluations are conducted, along with other measurements in accordance with the area the employee is assigned to.
Job Type:
Full-time Pay:
From $18.
75 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Schedule:
10 hour shift Monday to Friday Overtime Weekend availability Supplemental pay types:
Signing bonus
Experience:
Manufacturing:
1 year (Preferred) Work Location:
In person Practices safe work habits, maintains workplace in good order, and wears all issued personal protective equipment at all times in the workplace.
Other duties may be assigned.
401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance 10 hour shift Monday to Friday Overtime Weekend availability Signing bonus Manufacturing:
1 year (Preferred).
Estimated Salary: $20 to $28 per hour based on qualifications.
75 an hour From $18.
75 an hour Department:
Deck/Molding/Grinding Reports To:
Deck/Molding/Grinding Supervisor $2,500 Sign on/ Retention Bonus SUMMARY Forms sand molds to fabricate metal castings by performing the following duties.
Duties may be performed either individually or in a crew of two individuals and using either automatic, single station or two station cope and drag type of equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Must be willing and flexible to work in a variety of foundry positions:
Pour/Shift, Mold, Core, Grind, and Clean.
Molder - Forms sand molds to fabricate metal castings.
Duties may be performed either individually or in a crew of two individuals and using either automatic, single station or two station cope and drag type of equipment.
not plastic injection Coremaker - Makes sand cores used in molds to form holes or hollows in metal castings Grinder - Grinds and chips work piece to groove, bevel, round or straighten edges or remove excess stock from metals as specified by drawings, job orders, or guidelines or to removed defects, such as shrink cracks and holes Pour/Shifter - Operate transfer ladles containing molten metal to pour into prepared sand molds of various sizes and configurations.
Place metal weights and jackets on prepared sand molds preparatory to pouring molten metal into the molds.
Practices safe work habits, maintains workplace in good order, and wears all issued personal protective equipment at all times in the workplace.
Other duties may be assigned.
SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
EDUCATION AND/OR EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
MATHEMATICAL SKILLS Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's.
Ability to perform these operations using units of American money and weight measurement, volume, and distance.
REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel.
The employee frequently is required to walk, reach with hands and arms, and talk, or hear.
The employee must regularly lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
Individual should have ability to wear a respirator.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes, and vibration.
The employee is frequently exposed to extreme heat.
The noise level in the work environment is usually very loud.
COMPETENCE, AWARENESS AND TRAINING Competence, awareness, and training for probationary employees will be assessed by the New Employee Checklist, and the evaluations conducted and 30, 60, and 90 days, along with other training as needed.
Competence, awareness, and training for regular employees will be assessed when annual evaluations are conducted, along with other measurements in accordance with the area the employee is assigned to.
Job Type:
Full-time Pay:
From $18.
75 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Schedule:
10 hour shift Monday to Friday Overtime Weekend availability Supplemental pay types:
Signing bonus
Experience:
Manufacturing:
1 year (Preferred) Work Location:
In person Practices safe work habits, maintains workplace in good order, and wears all issued personal protective equipment at all times in the workplace.
Other duties may be assigned.
401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance 10 hour shift Monday to Friday Overtime Weekend availability Signing bonus Manufacturing:
1 year (Preferred).
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
